EPOXY ADHESIVE 6ml

No. 28 | Ref: 15014 | 12u. 144u.
Adheres perfectly, leather, porcelain, glass, ceramics, marble, metals and most plastics. Solvent, water and impact resistant. The syringe always measures out equal amounts of resin and hardener.
INSTRUCTIONS FOR USE: 1. Protect the work area. The surfaces must be clean, dry and free of grease and oil. Scrape smooth surfaces to allow better adhesion. 2. Pull the mixing rod out of the centre of the plungers (Fig.1). 3. Remove and set aside the storage cap (Fig.2). 4. Press the plunger onto a clean, disposable surface (Fig.3). 5. Mix thoroughly (Fig.4). 6. Apply to the surfaces to be filled or adhered. Immediately remove any excess adhesive with mineral spirits, acetone or rubbing alcohol. 7. Clean the tip of the syringe, pull back the piston slightly, and cover with the cap provided. Make sure that the cap is always placed in the same orientation on the tips. 8. The adhesive dries in 2 to 4 minutes. Objects can be moved after 20 minutes. Wait 24 hours before sanding or machining. The drying time may be longer at colder temperatures. Adhesives do not work on polyethylene or polypropylene products.